1 / 4
1.25 (83mm), 78mm and 70mm  Cone Fillers — zdjęcie 1
1 / 4

1.25 (83mm), 78mm and 70mm Cone Fillers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple easy to use, self explainatory.

Ocena
0 / 5
Polubienia
12
Pobrania
115
Wydruki
0
Wyświetlenia
684
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Use supports.  I painted a few support at the end of the funnel and it printed perfect. But if you use automatic supports use organic on build plate only (Cura) and tree support on build plate only (Creality)

Your choice of resolution I used .28mm.

Tagi