Yugioh Deck Holster for my 2 Player Duel Blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a deck box that splits into 2 for use as a dealer system for my 2 player Duel Blade
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 522
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a deck box that is designed to go with my 2 player Yu-Gi-Oh Duel Blade. It can also be a stand alone deck box if desired. It rests on a belt or pants. When a game of Yu-Gi-Oh is played on my duel blade, the lid can come off, and turn into a second box to hold the other players cards to draw from. both boxes have these clips on the front of them intended to be a temporary place to put the cards in your hand while you need to search or shuffle the deck.
To make this you will need to print:
1 Top
1 Bottom
3 Belt Hooks or Brimmed Belt Hooks (the Brimmed Belt Hooks have a small brim around the most vulnerable piece of the model to help with build plate adhesion, it will need to be cut off after printing)
2 Ban Dividers
2 GY Dividers
1 ED Top Divider
Assembly instructions:
- The top and bottom pieces have slots on their back sides for the belt hooks to slide into, there are holes in these slots to align with the hole in the belt hooks (2 on the bottom, 1 on the top). Slide the belt hooks into the slots and align the holes together. Both the Top and Bottom should be able to stand on their flat faces with the belt hooks extending higher than the height of the cavities. (View Images for reference) If done correctly, when the Top is acting as the Lid for the Deck Box its belt hook will be upside down.
- Slip a small piece of filament (1.75 mm diameter) through the holes to hold the belt hooks in place. Melt or glue them in place permanently.
To use, slide the ED Top Divider inside the Top, slipping the front face of the Top piece into the small tab on the ED Top Divider. Place your deck, extra deck, both Ban Dividers, and both GY Dividers in the Bottom. Slide the Top piece over the Bottom as the lid of the deck box. When using the Top for a second person's deck, remove the top, slide the ED Top Divider into the slot inside the top, place a Ban Divider and a GY Divider in the main deck section of the new box, and give it to the second person. You can now both keep your decks on your hips and draw from these boxes during the duel.
Here's a YouTube playlist of my full design process for this.
https://www.youtube.com/playlist?list=PL_oQDtSxMZKFP05oecNaEZzCS4-lQR3pi