1 / 3
Rigid belt mount for pistol holsters  (38 mm hole distance) — zdjęcie 1
1 / 3

Rigid belt mount for pistol holsters (38 mm hole distance)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rigid belt mount for pistol holster for 1.75'' and 1.5'' Kore gun belts (45mm and 38mm x 5.7mm).

Ocena
0 / 5
Polubienia
27
Pobrania
239
Wydruki
0
Wyświetlenia
846
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

I had a sturdy result with the following settings:

Nozzle: 0.6
Layers: 4
Infill 25%
Mateial: PETG
Supports: required

I suggest printing the model facing down with a 45° angel.

There is each a long and short version. Short or long determins the distance betweend the beld and how long the gun hangs. Long might be easier for you to draw the gun but also comes with a higher profile. Short is more compact but might be more difficult to draw quickly. If you are unsure i suggest the long version to start off.

Let me know in the comments if i can upload the right size for your belt

Tagi