Bluefin paddle board fin retaining clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified base clip for Bluefin paddle board fin retaining clip to ensure reliable hold.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This base clip replaces the existing base on Bluefin paddle boards adding some tangs to assist in the original friction grip of the fin retaining clip. An issue with the original retaining clip is that on occasion it can come loose in operation and you end up losing the fin from the board. This design adds a positive clip in feature to ensure that this doesn't happen.
It is recommended to print out of PETG with a minimum of four 0.45mm walls to ensure appropriate grip and flex of the clip. 0.15mm layer height is also recommended to get optimum layer adhesion to ensure longevity of the component. Please see attached .3mf for the exact print settings used.