Stylus (wacom) holder clip for Boox Note tablet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: Nov 2020: I added ver 4B which just has a simpler snap clip to hold pen. UPdate 2019 May: I added a parallel…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: Nov 2020: I added ver 4B which just has a simpler snap clip to hold pen.
UPdate 2019 May: I added a parallel design stl as well.
Stylus holder that fits onto the Boox Note tablet. I believe the stylus is a wacom stylus but I do not know what model. There is not much on the tablet to grab on, so you will have to either glue it or put some tape on the tablet back to fix it in place.
Two stl files are given. One has fillets and one does not. gcode is for a Prusa MK3.
Installation: I used masking tape to cover the area that is covered by the clip on the tablet. Then carefully applied thin coating of silicone glue on the masking tape and finally stuck the clip in place. This way, the glue and the masking tape are easy to remove.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.15
Infill:
30%
Filament:
[
](http://www.amazon.com/s?url=search-alias&field-keywords=Prusa+PLA&tag=thingiverse09-20)[ Prusa](https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=thingiverse09-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl) PLA Silver
Notes:
Use a brim for bed adhesion.
FreeCAD
Category: Tablet