Combi tool (spacer holder and wrench) for "Nylock Mod"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Non magnetic tool for easier manual bed leveling with "Nylock Mod"
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 147
- Wydruki
- 6
- Wyświetlenia
- 600
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Simple combi tool for quicker and easier application of the “Nylock Mod”.
One end of the tool can be used as a wrench to turn the nylock nuts. The other end contains an 6mm socket where you can press in one original spacer of your heating bed. Therefore you get an exact measuring spacer tool for the first leveling before you start the nylock mod leveling software.
Since the tool is not magnetic, it is much easier to handle than this fumbling with conventional pliers or steel wrenches that constantly stick under the bed.
I prefer printing in PETG (better heat stability), but probably PLA would also work.
Have fun!