Ender 3 V3 SE Dual 4010 Shroud K1 Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifies my 4010 shroud to fit the K1/KE Hotend
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 1384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
NEW VERSION - https://www.printables.com/model/818919-slim-ender-3-v3-se-dual-4010-shroud-k1-edition
I am not responsible if you break your printer for any reason using this shroud. If you require a shroud that works with the stock configuration please check out my single fan shroud here; https://www.printables.com/model/595397-ender-3-v3-se-fan-shroud
This is for use with the K1/KE Hotend only! If you are running the stock extruder check out my other mod linked below!
Uses the same fan duct and install instructions from; https://www.printables.com/model/619049-ender-3-v3-se-dual-4010-shroud
Also includes support for the Fysect Input Shaper to be mounted at the top with a cover, for this you will need an additional 4xm3x12 screws.
Please don't print the STEP files, they are for CAD work only, use the STL.