1 / 3
Somfy / Bali /  Springs Window Fashions VCZ1 (aka RSZ1) Remote Wall Mount — zdjęcie 1
1 / 3

Somfy / Bali / Springs Window Fashions VCZ1 (aka RSZ1) Remote Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall mount for the Somfy / Bali / Springs Window Fashions VCZ1 (aka RSZ1) remote.

Ocena
0 / 5
Polubienia
1
Pobrania
46
Wydruki
0
Wyświetlenia
532
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple wall mount that accepts a single screw to mount the remote to the wall. 

Print with a 0.15mm layer height. Wide part sitting on the build plate and enable supports.

Support settings that easily remove:
Top contact Z distance: 0.25mm
Pattern Spacing: 3mm
Top interface layers: 4
Interface pattern spacing: 0.2mm
XY separation between object and support: 75%

I used PETG but PLA will likely work as well.