Marbles and Jokers Board Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Popular Marble Vs. Jokers board game. Plays up to 8 people, great to play with family and friends!
- Ocena
- 5 / 5
- Polubienia
- 15
- Wydruki
- 0
- Wyświetlenia
- 804
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Standard Digital File License
Marble Vs. Jokers Board Game.
Consists of 8 total board pieces, numbered accordingly. Will require marbles, and a deck of cards to play. Very fun and enjoyable game I've played numerous times. I found that buying these game sets was ridiculous as the cheapest ones are $70. So, I designed board pieces that are 3D printer friendly and way cheaper to make. It only cost $1.94 worth of filament per board piece, along with a $9.00 marble set I used (Although you could just 3D printer your own marbles). All extra information regarding marbles, print profiles, and settings can be seen below. Please reach out and comment if you have any questions. Hope you enjoy playing!
Printing Information
- No Supports needed, very simple print
- Prints as one-piece, and can be scaled down to fit your printers bed-size
- Marbles used can be found below, otherwise you can always print your own
- 8 total board pieces included
- ANE Plastics brand only shows up if you “split parts” in your slicer software
Print Settings
- 210C Nozzle Temp
- 60C Bed Temp
- 15% Infill
- Gyroid Infill Pattern
- 2 hours, and 31 minute print (single color)
- 3 hours, and 24 minute print (mutli-color)
Marbles Used