Player Actions Tracker for Marvel Champions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this board to track the four actions that you can do once per turn. (Card holder for scale, not part of this file.)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 614
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
You can use 2x6mm round magnets to hold the end cap on, or just glue it on if you want to make it permanent.
The slides themselves are a bit of a tight fit. I sanded the sides and bottoms of mine down to make them slide smoothly, but you could likely print them (or the base) at a slightly different scale to facilitate sliding, as well.
The base is best printed on its side. Careful with the little handles on the slides, they're pretty fragile (something I'll try to improve on in V2).
The extra magnet holes on the outside of the base are to attach to the my modular Marvel Champions Hero/Villain board(s), which I'll be publishing soon!