Mini Lathe Pulley
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
17 tooth pulley that fits on the shaft of many 7x mini lathes. Harbor freight models 33684 93212 + Others
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 769
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This part fits very tight. The hole for the motor shaft is zero clearance. Your printer should be well tuned for mechanical parts printing. I printed out of ABS and was able to tap it onto the motor shaft using a dowel and dead blow hammer without too much force.
You may have to flip the model in your slicer so the large side is down on the plate. I used 0.2 layer height and build plate only tree supports and it printed fine. It is currently working on my lathe. The old original one snapped and I didn't want to wait for the replacements to be shipped to me.
My settings:
0.4 nozzle, 0.2 layer height, 4 walls, 5 top and bottom, 100% infill, tree supports, ABS, 270/110 on G10 or PEI