Holder for paper towels, Küchenrollenhalter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for paper towels attached to the hsw. Küchenrollenhalter für die HSW.
- Ocena
- 3,5 / 5
- Polubienia
- 48
- Pobrania
- 201
- Wydruki
- 1
- Wyświetlenia
- 996
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Attachment for papertowels stick to the HSW. Two stl-files, holder and pin, useable for both sides, they're symetric. Pin diameter is 40mm, that's slightly bigger than 1 inch 9/16. I use rolls 260mm wide and 115mm diameter. It will hold surely 10 inch wide rolls with 5 Inch diameter if the pin fits the core.
No empty inserts needed. The pins fit very nicely into the holder, just snap them in.
Printing the holders sideways and the pins together needs about 98 gram filament, printing the holders upright the whole print will take about 113 gram.
Support is needed anyway, I used organic support, sideways printed. For this reason it's a nice model for testing some support prints.
PLA or PETG, what you prefer. 0.20mm layer height, 0.4mm nozzle.