DIY Hex Nano leaf like LED panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FYI thingiverse SUCKS and is removing creators Amazon links and replacing them with their own. All the parts you need…
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 930
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
FYI thingiverse SUCKS and is removing creators Amazon links and replacing them with their own.
All the parts you need are in the YouTube video description
assembly video: https://www.youtube.com/watch?v=nvomSn_3Rz8
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2 and .3
Infill:
100
Filament: Overture Petg or ABS and PLA Black and White
Notes:
Print the Diffusers in matte white PLA with a .4mm nozzle
Print the Frames in Black PETG or ABS with a .8mm nozzle @ .3mm layer height (.4 willwork just takes a long time) all without supports. You might need to tune your bridging.
The fastener parts print in 3 perimeters in PETG or ABS.
Category: Electronics