Boyds At-One Mix and Match Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version that allows you to still use the existing butt stock and various extension lengths.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
This is a modified version of the original that has been broken up to include a base plate to attach to the aluminum stock extension. Included are two sized extensions to increase or mix/match to size. The original rubber butt plate can be attached allowing you to use either a ridgid fillament or TPU as you wish. A end but plate is included if you need to print a new one.
The base plate is attached with M5 bolts and the exentensions are attached with M3 bolts (length is dependent on the extensions you choose) and M3 nuts. The original butt plate is attached using the existing bolts.
NOTE: The modifications were done in PrusaSlicer and cannot be exported as individual STL's doe to the negative space adds. I will update if I can get properly do this into individual STLs.