Lazy Suzanne/turntable horizontal spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Goes with the Mini base, fits any filament spool horizontally under the printer (even spools with HUGE center holes!)
- Ocena
- 4,818 / 5
- Polubienia
- 134
- Pobrania
- 643
- Wydruki
- 14
- Wyświetlenia
- 4678
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
From my experience, only Prusament rolls fit properly in the grooves under the Mini. And even then, it doesn't turn super smoothly.
I made this lazy Suzanne so that I can use it with any filament brand, no matter how wide the center hole is (Hello Eono with your massive 10cm center holes!)
I designed it to only require parts from the Mini's spare bag so there is no need to wait 3 months for that Aliexpress order to arrive: it uses a 608Z bearing (from the original filament spool holder that came with the printer), a 12mm M3 screw (look in your spares bag), and an M3 nut (either Nylock or just the plain, slimmer variety).
I added little hexagons all over the tray to save on plastic and keep with the Prusa theme from the Mini base.
Note that for the tray and for the axis, I am using a sacrificial layer so that the holes print well without needing supports. Once the print is done, simply punch the layer obstructing the screw holes (either with an allen key, a screw, or an exacto knife).
As usual, STEP files included for easier remixes.
I recommend using the supplied 3mf file as it contains the correct settings and orientation for optimal printing.