MLOK QD Sling Swivel Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MLOK QD Sling Swivel Mount
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 233
- Wydruki
- 0
- Wyświetlenia
- 1581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
MLOK QD Sling Swivel Mount by DB Firearms.
This utilizes QD Socket Heat Inserts by Hyperion 2A
Print with PLA+ or better. CF Nylon would be the best for a long lasting piece. Though these have been known to withstand over 200lbs of force in PLA+
Print with the cup facing up with the MLOK nubs on the build plate. Supports on build plate.
Melting in QD insert: Use the side of a soldering iron to gently apply pressure to the aluminum QD cup. It will slowly melt in. Don't apply extra pressure. A small amount will be enough once the cup gets to the right temperature. To finish the melting in, push the cup in upside
down on a flat surface. Allow to fully cool before using.
You will need two M4x12mm flat head screws with mlok style nuts on the back.