Parametric cable chain with cable separators
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With the uploaded scad file you can easily create cable chains, the parameters to change are at the end of the script…
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 288
- Wydruki
- 0
- Wyświetlenia
- 1082
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
With the uploaded scad file you can easily create cable chains, the parameters to change are at the end of the script (line 285 and following). The file was designed for a special purpose and was not cleaned up much before upload, but hopefully it's usable for other people too :-).
length: the total length of a chain link
outerWidth: the outer width of a chain link
outerHeight: the outer height of a chain link
angle: the angle from one chain link to another
clipDiam: the diameter of the round clip that connects to links
cables: an (multidimensional) array with diameters of the cables (include additional space of 10-20% per cable). I.e.: [[7.15, 6.6, 6.6], [7.15, 7.15, 6.6], [10.8, 6.6, 4]] => creates 3 columns with each 3 cables stacked.
The wallsizes can be changed in the module "chainLink".
The switch "singleLink" in line 321 allows to switch between a usefull view for editing and export (true) and a view to see a full half circle with the chain links attached to each other in the given angle.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Notes:
We used PET-G as filament therefore a wide brim (32 rounds) was necessary to avoid wrapping
Category: Parts