eStep Callibration filament guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This guide is 120mm long with guides every 10mm. This way you can keep the filament straight while measuring your…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This guide is 120mm long with guides every 10mm. This way you can keep the filament straight while measuring your filament. Get a piece of filament around 500mm, Stick it in your heated extruder and prime the nozzle. Use this guide to measure 120mm from the extruder arm. Mark it with a sharpie on the outermost end of the guide while tight against the extruder arm.
preheat your nozzle.
run gcode:
m92 e100
This will make the math easier.
Extrude 100mm.
Measure the space between your sharpie mark and the extruder arm.
Take that number and subtract it from 120 for the amount extruded.
solve 10000/amount extruded=new estep value.
run gcode:
m92 e****(new estep value)
m500 (this will save it to the motherboard)
Have a self-congratulatory beer, bowl, nacho, whatever your thing is.
Print Settings
Rafts:
No
Supports:
No
Infill:
10
Category: 3D Printer Accessories