22mm CPAP Adapter for RatRig VCore3/3.1 CPAP box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CPAP hose adapter for VCore CPAP system by Scrambler77
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After cutting the hose cpap hose to size, the raw end wouldn't fit over the hose fitting for the amazing design from @Scrambler77.
I designed this adapter so I can slip fit the hose on to the existing adapter. Works with standard 22mm CPAP hose (inner diameter is closer to 18mm for the actual hose).
This is designed for friction fit so, no zip ties needed. You will need to print it in TPU. I am working on another model which will adapt the original rubber end to couple the cut hose piece. This would be able to work with ABS. I'll post that soon.
Here is the original design it is for:
RatRig VCore3/3.1 CPAP box by Scrambler77 | Download free STL model | Printables.com