Filament guide for 2kg Spool holder for Original Prusa MK4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw on filament guide for the 2kg spool holder.
- Ocena
- 4,833 / 5
- Polubienia
- 54
- Pobrania
- 492
- Wydruki
- 17
- Wyświetlenia
- 1790
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I made this addon for the 2kg spool holder because the filament always jumped off the spool when the print head was too high. It uses 2 M3 nuts, 1 M3x30 screw and 1 M3x10 screw. I also used the short bowden tube from the original filament guide. All screws and nuts were included in my Mk4 Kit. I printed it in PETG with standard printer settings.
You have to screw it on to the second cut out from the bottom on the spool holder.
Because people had problems with the screw beeing to long, I changed the direction of the screw. It should no longer be a problem because it sticks out on the other side now.