Prusa XL Heatbed Tile Mug Warmer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mug warmer utilizing Prusa XL's heatbed tile
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 81
- Wydruki
- 4
- Wyświetlenia
- 2241
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After seeing the idea on Twitter and others working on similar projects, I designed this coaster to hold a Prusa XL heatbed tile in order to keep mugs (and the liquid within) warm.
Tile will heat to roughly 175*F to keep your beverage warm.
The following items are needed:
Molex Clickmate cable (1.5mm pitch) (optional if you solder directly to the board)
USB-C PD3/QC charger (I used this one)
USB-C cable rated for PD3/QC (I used this one)
4x M3-16mm screws
To assemble:
Cut the molex cable in half
Strip the two wires indicated in image 3 (these are wired to the bed heater)
Solder the molex cable to the pads on the PD trigger board (polarity doesn't matter)
Connect the molex cable to the heat tile
insert PD trigger board into housing and secure with tape or hot glue
Place tile on housing and secure with 4 M3 16mm screws
Update Feb 13, 2026:
I've added a shorter version, but this version will require soldering wires directly to the tile. The molex harness will not have enough clearance.
If you want to help support the development of my designs: https://ko-fi.com/rwills