GearHead Quest 3 Strap XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement head strap for the Meta Quest 3 but its 15% bigger.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 126
- Wydruki
- 2
- Wyświetlenia
- 2145
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
This head strap for Quest 3 is an adaptation of my original Quest 3 head strap here: https://www.printables.com/model/725344-gearhead-quest-3-strap . This version is for lads with plus sized heads. This was accomplished by scaling the back half of the OG head strap by 15% and sticking it awkwardly back onto the normal sized front half (its difficult to find Quest 3's that are 15% larger). This results in a .96 inch (24mm) increase in the inside width of the Frame (The part right above your ears).
Caution: I have yet to complete one of these builds so proceed at your own risk. There is a small chance that I missed a detail and your print will be junk as a result. Please share your results if you do try it. This is a work in progress and I'll be updating this page with pics and models as I get them.
The frame is large (231mm x 205mm) but it should fit on a MK3 or MK4. You will also need to print scaled up parts from the OG head strap.
| Part Name | Scale Factor | QTY |
| Q3 Frame XL | 1.0 | 1 |
Q3 Headset Pivot R | 1.0 | 1 |
Q3 Headset Pivot L | 1.0 | 1 |
Q3 Screw Half-10 | 1.0 | 2 |
Q3 Screw Half-10 | 1.15 | 3 |
Q3 Gear Frame | 1.15 | 1 |
Q3 Back | 1.15 | 1 |
Q3 Center Gear | 1.15 | 1 |
Q3 Screw Gear | 1.15 | 2 |
Q3 Side Rail R | 1.15 | 1 |
Q3 Side Rail L | 1.15 | 1 |
Q3 Transfer Gear | 1.15 | 2 |