SUP air valve GoPro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A GoPro mount that replaces your SUP air valve dust cap.
- Ocena
- 4,5 / 5
- Polubienia
- 103
- Pobrania
- 491
- Wydruki
- 2
- Wyświetlenia
- 2718
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
If you're looking for a way to attach a GoPro to your stand up paddle board, look no further. This mount replaces your original air valve dust cap providing a secure way to attach the camera. For extra peace of mind you can also pass through the string that was attached to the original dust cap.
Important: Your dust cap should come with a 4mm rubber gasket. You'll need to put it on the mount to get a good fit.
The mount is designed so that the camera can face the front/back of the board once the mount is screwed in. If the orientation of your valve is different, you might need to modify the attached model accordingly.
I tested it with Fanatic board but it should work with other boards as well.
While I only had a chance to print it in PLA, I'd recommend using PETG instead due to its better temperature and UV light resistance and higher tenacity.