Jig for K1 Max silicon bed plate column
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello, this is a jig to cut the aftermarket silicon column for 3d printer bedplate, since for my K1 max the column…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 830
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
this is a jig to cut the aftermarket silicon column for 3d printer bedplate, since for my K1 max the column height measure is 12 mm and it is not easy to find e buy locally i made the jig to cut properly a 18 mm column that is typical for 3d printer.
Very easy to use put the column on Cutter Jig (I added 3 different length 10-11-12 mm), after that tighten the plug, not heavily, just to arrive to the surface and after that by manual cutter with new blade, cut it.
In addition, if you want make a column by yourself, i added a disposal mold, buy a Motorsil silicon and feed the mold, when it is dried, destroy the mold and you will have a perfect column.
Regards
Jonweb
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: Elegoo PLA Grey
Category: 3D Printer Parts