SKR 1.3 enclosure for LowRider2 CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SKR 1.3 enclosure for LowRider2 CNC, 25 mm EU version.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a SKR enclosure for LowRider2, a full sheet capable CNC. 25 MM EU version.
If You haven't cut your pipes to the exact lenght then You can use this :)
It's just friction fit, holds great. There is an option for cooling using 1x 60x60 or 40x40 fan (with a provided adapter).
Slots in the lid are for routing ribbon cables to a screen.
You can acces SD card and USB port easily
When it comes to fasteners You will need:
- 6x flat M3 nuts (just like those that come with a Prusa printers kits),
- 6x M3x8 mm - for securing lid to the box and clamps to the box,
- 4x M3x6 mm - for securing SKR to the box, can be longer.
As You can see adapter is in 2 versions. One can be prineted as is and the other one marked as “mesh” can be modified to have a grill. There is .3mf attached so You can knock Yourself out playing with it. More on that here https://help.prusa3d.com/en/article/modifiers_1767
There are some desining tricks used to make it 3D print friendly, no supports are needed.
Left and right clamps are basically the same, one is just mirrored so nuts are on the same side :)