1 / 1
MK4 Filament Guide for connecting PFTE tube to extruder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Guide with the PC4-M10 connector on the bottom to allow a PFTE tube to connect the guide to the extruder
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 879
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (23)Powiązane
I was having issues ensuring that my filament was long enough when it entered from the top of the enclosure. This allows a PFTE tube to be connected, creating slack in the filament and ensuring the nextruder doesn't report a crash detected.
Printed in PETG with 3 perimeters and 25% gyroid infill.