1 / 4
Holder for toilet paper, wipes and a smartphone - easy to print — zdjęcie 1
1 / 4

Holder for toilet paper, wipes and a smartphone - easy to print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An easy to print toilet paper holder that can also hold wet wipes and a smartphone.

Ocena
0 / 5
Polubienia
6
Pobrania
45
Wydruki
0
Wyświetlenia
267
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

A toilet paper holder that can be printed with no or very little support (just under the two bigger fillets of the side wall). Uses about 120g of material and prints in about 7h using slow(ish) printing speeds, 0.6mm layer width, 0.28mm layer height and fuzzy skin.

It can hold a big roll of toilet paper, wet wipes and a smarphone and be affixed to a wall with screwes or double-sided tape.

Fuzzy skin improves the look drastically, in my opinion, as it doesn't look like a printed part any longer. I used two modifier bodies in Prusa Slicer - a cylinder to remove fuzzy skin from the tube and a box to remove it from the backside (as it has to sit flush against the wall). The 3mf file has those modifications, so you can directly open it in Prusa Slicer. I also used a height modifier to give the left wall a little more inflill. PLA or another stiff material is a better choice than PETG, though both should work.

Tagi