1 / 13
Grove Ultrasonic Ranger cover and back plate — zdjęcie 1
1 / 13

Grove Ultrasonic Ranger cover and back plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cover for the Grove Ultrasonic Ranger v2.0 (wiki.seeedstudio.com/Grove-Ultrasonic_Ranger/). Also has back plate

Ocena
0 / 5
Polubienia
0
Pobrania
24
Wydruki
0
Wyświetlenia
206
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Grove Ultrasonic Ranger Cover with Back Plate

This is a standalone part that is normally incorporated into Nexgen STEM School's Rover robot, an almost fully 3D printed educational robot suitable for STEM activities in schools. We will be uploading all parts of the robot, however you may want to use this one standalone in a different project of your own.

The ultrasonic ranger cover piece fits neatly onto an SG90 Micro Servo:

Just put the servo arm in and screw it down:

I have uploaded 2 versions of the model. The second version is for the longer screw which I favoured over the one that is usually bundled with the SG90. This is really only for fortuitous reasons - I have a load of the longer screws, so use the shorter screw version if you want to use the screw bundled with the SG90.

One thing I have found. Depending on which variant of SG90 you get, sometimes the servo arm will be a slightly different size which is a real pain. There isn't a lot I can do about this other than say I have bought all my SG90 servos from Aliexpress and I only encountered this issue once after using & buying many servos.

So the two screws are approx 9.5mm and 12mm as shown below:

Tagi