1 / 3
HTU21 temperature sensor cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printed cover for the HTU21 temperature sensor
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a design I created to mount a HTU21 sensor to the outside of an enclosure.
The project is a dew controller, and as the sensor needed to measure the dew point, it needed to be mounted on the outside of the enclosure.
Designed with OnShape
Sliced with PrusaSlicer
Printed in PLA with standard profile