Y Belt Holder One Part MK4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
compact and the oblong hole is replaced be normal hole
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 320
- Wydruki
- 12
- Wyświetlenia
- 1639
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Print instructions see original post https://www.printables.com/model/451501-mk4mk39-printable-parts
Print in the provided position without support.
The existing screws can be reused.
If you have a collision with idler or motor mount you can try the versions with smaller rib.
y belt tensioner
You will need another way to tighten the y belt:
This one should work fine https://www.printables.com/model/575521-simple-prusa-i3-mk4-y-axis-belt-tensioner-3-mm-and but I did not test it.
The belt tensioner https://www.printables.com/model/585494-prusa-mk4-y-axis-belt-tensioner did not work for me. It has a collision with its big nut. You lose about 4mm of y travel.
This is better https://www.printables.com/model/645676-mk4-y-axis-belt-tensioner-mk3ss . It still has a collision but you lose only about 1mm of y travel.
cad model
link to Onshape model: