Customizable RouterBOARD Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable RouterBOARD mount! This is based on tedder's Mikrotik RouterBoard Wall Mount for RB260GSP, but the hole…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 563
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Customizable RouterBOARD mount!
This is based on tedder's Mikrotik RouterBoard Wall Mount for RB260GSP, but the hole spacing on my old RB750GL is different. So, using their mount as inspiration, I whipped up my own similar mount in openscad, which I made customizable. For now, only the distance between the two mounting pins is customizable, I may add more dimensions to the customizer if requested
I included the STL for the 750GL mount as well
My version has slightly different dimensions for the rest than the original, it should be optimized for printing at 0.2mm layer height. I made it slightly thicker than the original, and the heads of the mounting pins are also a bit larger
I mounted mine with 3M VHB mounting tape, there are also screw holes similar to the original's
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
No
Supports:
No
0.2
Infill:
10%
Filament:
AIO Robotics PLA Red
Notes:
I recommend 3 perimeters so the pins are nice and strong, this should give plenty of surface area for inter-layer bonding so it should work fine with PLA or PETG.
with 3 perimeters, infill settings won't really matterCategory: Organization