4-pin Fan Header
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3- and 4-pin compatible fan header, with a tab so you won't plug it in backwards! Great for DIY projects involving PWM…
- Ocena
- 4,75 / 5
- Polubienia
- 31
- Pobrania
- 265
- Wydruki
- 4
- Wyświetlenia
- 1712
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
3- and 4-pin compatible fan header, with a tab so you won't plug it in backwards! Great for DIY projects involving PWM PC fans, but it should work with regular 3-pin fans, too.
I bought some generic pin headers and used flush cutters to remove some individual pins to put into this fan header.
Getting the pins through the holes can be difficult, though. I used pliers and pushed them through with some effort. I may adjust the model with a little more tolerance in the future.
UPDATE 2023-06-06: based on feedback from other makes, I revised the model so it can be printed on its back, which should result in a significantly less fragile part.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
Rafts:
No
Supports:
No
Notes:
use your favorite settings! This is about as quick and easy a print as it gets.
Category: Electronics