1 / 2
Sovol SV07 Plus Filament Sensor mount — zdjęcie 1
1 / 2

Sovol SV07 Plus Filament Sensor mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount to replace filament spool mount of filament sensor for Sovol SV07 plus.

Ocena
0 / 5
Polubienia
10
Pobrania
97
Wydruki
0
Wyświetlenia
542
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Filament Sensor mount for the Sovol SV07 Plus. I am moving my printer to an enclosure and won't be using the spool holder, so I needed a mount for the filament sensor.

Has a built-in printed spacer (as I dropped mine while changing it out and couldn't find it on my floor). This spacer is necessary so that the filament sensor can move freely even when the screw is tightened.

The screw at the back will have to be replaced as the original is too long by 5mm, so an m4x10 or less should work.

Printed in PETG with 3 walls, probably not necessary. 

Tagi