The Space Cowboy AR Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Space Cowboy AR Grip by Ricecutta
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 384
- Wydruki
- 1
- Wyświetlenia
- 1362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Go crazy…. Mix and match colors! Change the panel when you get bored! Change the panel when you have filament to use up! Also included are the hex textured grip panels by Slimjim240B.
Print Settings for the grip
Use: PLA+ or better
Extruder: 218C
Bed: 60C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 4-5
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%
Print Settings for the panels
Use: PLA or better.
Extruder: 218C
Bed: 60C
First Layer Print Height: .20mm
Standard Layer Height: .14mm
Wall Thickness: .40
Wall Perimeters: 2
Infill: 25%
Material Flow: 100%
Non-printed Hardware Needed:
- 1x Allen Head Screw, 1/4-28 x 1"
- 1x Steel Star Washer
- 1x Safety Selector Detent Pin
- 1x Safety Selector Detent Spring
- 1X M4x25 screw with matching nut. Stainless or black anodized to complement your color combination! (If you don't have an anodized screw paint it.)