1 / 5
Test the strengh of your 3D parts — zdjęcie 1
1 / 5

Test the strengh of your 3D parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Test the strengh of your 3D parts. The easy way.

Ocena
0 / 5
Polubienia
2
Pobrania
37
Wydruki
0
Wyświetlenia
172
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This square and circle, both are about 20mm and with 2mm walls. Print one or both to test your 3d print strengh, see if the printed is doing fine it's job or is under-extruding. Under-extrudion leads to layers not bonding, or bonding weakly between them and makes the parts britle. Test it by trying to crush them with one or both hands. 

If they break easly: 1. very bad. 

If they deform: 2. bad. 

If they keep their shape: 3. perfection.

 

Solution is in the ‘’E'' steps. The stepper that pushes the filament into the nosle. Try to rise the ‘’E'' steps up so the printer pushes out more material and the layers melt well between them. Last thing to keep in mind, if the filamamen has taken humidity all the above may not apply because it's a chemical issue, not mechanical, and you have to de-humidify the filament before.

Tagi