1 / 4
Water Tank Reservoir Handle for Saeco/Philips - Exprelia/Lirika | 996530007587 — zdjęcie 1
1 / 4

Water Tank Reservoir Handle for Saeco/Philips - Exprelia/Lirika | 996530007587

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for broken handle in your office coffee machine.

Ocena
0 / 5
Polubienia
4
Pobrania
98
Wydruki
0
Wyświetlenia
434
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

The design is meant to be used with M6 screws from the rack.

It was originally printed in PLA, which turned out to be stronger than the original material.

 

Update: The PLA did not withstand the stress, and I encountered difficulties fitting the M6 screws.

For the next version, I printed it using PETG. I also added a negative volume in the slicer and inserted a piece of straight rod for reinforcement. Additionally, I switched to M5 threads and used countersunk screws, which provided an even better fit.

Tagi