19.5 Inch Rack Ears (1U, 2U, 3U, 4U)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable rack ears with #10-32 tapped holes for 1U, 2U, 3U and 4U sizes.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 190
- Wydruki
- 1
- Wyświetlenia
- 2433
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Printable rack ears with #10-32 tapped holes for 1U, 2U, 3U and 4U sizes to mount rack gear together outside of an enclosure. Also includes files for 1U, 2U and 3U with a leg to lift up the front of the piece of gear.
I have a lot of pieces of rack gear that I want to keep together, but don't have a full case to put them in. These rack ears allow me to mount the pieces of gear together in a simple way.
Printing
You will need to print two per set.
Printed in PolyMaker PolyLite PLA Pro for strength with 2mm walls and 40% infill at 0.12mm layer height.