L-Bracket for Canon 250D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
L-Bracket made to fit Canon 250D, required for assembly: - 2x M3 x 15mm - 1x M3 x 8mm - 1x 1/4" screw
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a L-Bracket for mounting the camera horizontally as well as vertically, without changing the position of the tripod head.
Additionally, there is a hook on the bottom to make it possible to clip to a backpack, strap or similar.
Print in the orientation of the images above.
For Parts 1 and 2, supports are not needed.
for Part 3 I would recommend turning on supports and 100% rectilinear infill.
required for assembly:
- 2x M3 x 15mm
- 1x M3 x 8mm
- 1x 1/4" screw
Screw together parts 1 and 2 with the M3 x 15mm screws. Optionally add the stabilizing pin at the top with the M3 x 8mm screw, which fits into the strap attachment on the camera.
I made this part for the Canon 250D, but it might work for other similarly sized cameras.