Probe Halo for 40mm Diameter Probe Bodies
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach this to your probe tip to help save your probe from crashes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Attach a probe halos to your probe tip to avoid crashes with the probe body.
Theses are designed for M1x0.25 heat set threaded inserts that are 2.5mm long. These are TINY. I suggest threading a screw into them, which gives something to hold onto with tweezers. Then lightly apply pressure to it while letting the soldering iron heat up the insert.
There are three models with slightly different sized bore diameters. Depending on which probe tip you have (a few of mine had slightly different diameters) and how well dialed in your printer is you may need one of the larger ones.
- 7.0 mm bore: 40mm_probe_halo_7_0mm_bore
- 7.2 mm bore: 40mm_probe_halo_7_2mm_bore
- 7.4 mm bore: 40mm_probe_halo_7_4mm_bore
I don't recommend scaling the model itself, as that will distort the small hole for the heatset insert.