Compensator For EMG PDW M2 GBBR (Airsoft)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for my lost PDW compensator. Closely resembles the Knight's Armament Triple Tap Compensator.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Notes:
I lost or gave away my compensator, so I used some image references online to create a similar one with my own style. The gas port slots go all the way around, but only the ones on the top 180° are open to the inside. The bottom half slots are completely closed. This is of course not important on an airsoft gun but it's worth noting the difference from the original. The star pattern is a 7 point star, and I've added chamfers to the top and bottom so you can easily see how to align it as you screw it on.
Thread Pitch & Functionality:
This uses left handed (AKA reverse or Counter Clockwise) 14mm M14x1 ANSI Metric M Profile threads (standard for airsoft). The threads are scaled up by 1.02x, resulting in a thread size of 14.28mm which worked perfectly with my printer. I've included a cross sectional of the thread profile so you can see what worked for me.
Updates:
Increased the front hole size from 7mm to 9mm. I discovered that when using extreme hop-up settings, the BB will impact and destroy the front, so hopefully 9mm is large enough.
Printer Settings:
- Printer: Ender 5 S1
- Filament: Sunlu PLA+ Black
- Supports: Tree Supports
- Print Orientation: Vertical
- Infill: 100%
- Layer Height: 0.2mm