Boat Rearview Mirror Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement mounting bracket for attaching a rearview mirror to a boat tower (2" diameter tube).
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a replacement mounting bracket designed for this boat rearview mirror:
Amazon.com: CIPA 626-11083 11083 COMP II Black 4" x 11" Marine Mirror : Automotive
This mounting bracket allows the mirror to be attached to 2" tubing (which is the most common boat tower tubing size). It could probably be modified, or additional inserts could be used for other sized tubing.
Required Hardware for assembly:
4ea. - M5 x 35mm bolt w/ nut
2ea. - M5 x 16mm bolt w/ nut and washers
1ea. - Fender Washer (bend to match the rounded contour)
Make sure to keep and re-use the long bolt and inner bracket pieces from the original clamp, you need these to assemble the new bracket (look at the photos for reference).
I printed in PETG as its intended for outdoor use and UV exposure. Tolerances should work with most filaments and print settings, but I do suggest using 40% or higher infill for structural strength.