1 / 3
BETAFPV Pavo Pico Frame for 2s Batteries
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement frame for the BETAFPV Pavo Pico 2" whoop
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 485
- Wydruki
- 4
- Wyświetlenia
- 1611
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 4) (Komentarze: 6)Remiksy (1)Kolekcje (32)Powiązane
This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the following dimensions: M2 x 4 (length) x 3.2mm (diameter).
I print these at 0.12mm layer height using a 0.4mm nozzle in ASA. Please comment on your experience and remix if you can improve upon it. Print with organic tree supports over build plate.