RyobiUSBPowerCutterHook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hook for a Ryobi 4v USB Power Cutter with holes to fit Ikea Jerker desk.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This allows you to hang your Ryobi 4v USB power cutter on a wall out of the way. The holes were space to match the holes on the side of an Ikea Jerker desk so you can hang your cutter on the side of the desk, but would mount fine to any other flat surface with m4 bolts.
I print it with the bottom of the hanger on the print plate because I believe the hanger would break off the back plate if you printed it flat on its back and the support situation in the slots would be a pain. There is probably an angle with the back bottom edge of on the print plate that would allow full rings around the screw holes and offer maximum strength but the tool is not that heavy so the way I printed it seems fine.