1 / 2
Extension and fill-cap for GarageBoss GB125/GB150 oil drain pans — zdjęcie 1
1 / 2

Extension and fill-cap for GarageBoss GB125/GB150 oil drain pans

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Approximately 4"/100mm extension for the GarageBoss 12.5 quart oil drain pan using the correct thread.

Ocena
5 / 5
Polubienia
9
Pobrania
132
Wydruki
1
Wyświetlenia
764
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to buy the GB125 “Reacher” oil pan to change the oil in my truck but they have apparently stopped making it or the spare drain tubes for it.  So I bought the normal 12.5 quart GB150 drain pan and then made this 4" extension and cap for it using the proper “buttressed threads” that the pan uses.

If you want to play with making your own, just know that Fusion does not have the DIN6063 built in so you will have to model a custom thread and GarageBoss chose a non-standard size so get out your calipers.