1 / 7
Scuba Diving Fin Rail Shaper for Mares diving fins — zdjęcie 1
1 / 7

Scuba Diving Fin Rail Shaper for Mares diving fins

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fin shaper for Mares Scuba diving fins.

Ocena
0 / 5
Polubienia
11
Pobrania
57
Wydruki
0
Wyświetlenia
1162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Description

 

If you have scuba diving fins like the Mares Avanti, you probably got some some parts to keep the shape of the rails… and likely lost some of them :)

This is what happened to me so I made a model to create replacements. I started with a design similar to the original but it did not work very well for 3D prints so I made an optimized model for printers.

The model is very easy to print without supports and the next time you lose one of those parts, you may just print a new one.

 

Print instructions

 

This is a very easy print. You do not need thin layers and printing in 0.3mm will do just fine.

I printed mine in PLA. While PETG will be more appropriate for outdoor, I use those parts mostly for storage at home.

The model is tall so printing with a brim is recommended. You may get slight impefections around the overhang but that does not affect the function.

You will typically need 4x pieces so I am attaching gcode for 1 piece as well as a set of 4, in both PLA and PETG.

 

 

Tagi