Virpil Controls VPC base adapter for 8020 profiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for Virpil Controls' VPC flight stick bases to mount them on 8020 profiles. It was designed for the WarBrd…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
An adapter for Virpil Controls' VPC flight stick bases to mount them on 8020 profiles.
It was designed for the WarBrd base since that is the one that I have but it should work for the MongoosT-50CM2 as well since they share case dimensions and bolt spacing. I actually designed this adapter based on CM2 drawings since my base hadn't arrived at the time.
I printed it with ColorFabb XTCF-20 and it turned out a bit more rigid that the aluminium plate that came with the WarBrd base.
In the photos I have it mounted on a SimLab P1X frame but it will fit any 40mm+ profile with Misumi spec, specifically an 8mm channel. Fusion 360 source file is included if you want to adapt it to other profiles.
For attaching the base to the adapter I used the included counter sunk bolts that came with it and for mounting the adapter to the frame I used M8 15mm bolts.