CR6SE Direct Drive with Duel Extruder Gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is modded for Duel Extruder Gear upgrades, allowing spacing as the ptfe tube is higher.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a design I remixed for the CR-6SE that allows for a direct drive upgrade with a Duel Extruder Gear, similar to the image below

The need for this is because the coupling for the PTFE tube is positioned higher to allow clearance for the gears.
As for printing, honestly, there isn't any printing orientation that doesn't require a ton of supports so it's just up to personal preference. I personally printed with PETG as the gear can get hot.
Hope this helps someone as this took a lot of trial and error on my end. Please let me know of any questions