1 / 3
WLToys 144001 Higher battery holder 1261 battery partition assembly
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A higher holder for battery on WLToys 144001. This one is only for the front, as you still need lower one for the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
A higher holder for battery on WLToys 144001. This one is only for the front, as you still need lower one for the cables to clear. Might design the rear one if the battery will still be falling out.
It's snug fit for my Teranty 3500 mAh (in reality they are 3000 mAh 30mΩ 20C) batteries 34mm in width.
Stock screws.
Category: R/C Vehicles