1 / 7

Windturbine MK2 neo Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stuart800

@Stuart800_1278696

Remix of the great wind turbine by rosch8

Ocena: 0 / 5
Polubienia: 63
Pobrania: 242
Wydruki: 0
Wyświetlenia: 3185
Oceny: 0

Aktualizacja u źródła: 6 cze 2026

Informacje o modelu

Źródło: Printables
Kategoria: Outdoor & Garden
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (17)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (4)Kolekcje (64)

Thanks again to rosch8 for the beautiful original wind turbine.

I recommend printing the successor, the MK3. The bearings on the MK2 wind turbine are difficult to install without causing binding, and temperature fluctuations can also lead to bearing strain. The MK3 uses only one bearing per rotor, which works completely trouble-free. Recommend: "Wind Turbine MK3 neo Remix" and highly recommend "Double wind turbine MK3 counter rotating"

I modeled a rear with tail unit, which does not require a threaded rod. This makes it easier to turn in the wind when the stick isn't quite vertical. I removed the bars on the vertical axis and added a cylindrical bearing seat. I used 688 ZZ ball bearings for the rotor and vertical axis. There are six different rears and four different tailfins I glued the tail units to the carrier with CA. I recommend the parts with DIN934, which are for normal nuts.

Assembly:
1x threaded rod M8x106 mm as a wind turbine axle (M8x116 mm DIN934 nut)

4x ball bearing 688 ZZ
2x cylinder screw M 4x16 for body
2x cylinder screw M 4x10 with nut for rear
1x cylinder screw M 4x10 with nut for tail unit

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA, if the printer is suitable for ASA.

I would also like to recommend these wind turbines:

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Ugrinsky Vertical Axis Wind Turbine Remix