1 / 1
Chiappa Little Badger TDX Stock (22LR)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Stock for Little Badger TDX
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 1434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement stock for Chiappa Little Badger TDX (Extreme Takedown)
- Uses an M4 (6mm depth is fine) heat set insert in the hole provided to attach to the stock shaft.
- M4x16MM (Or as close as possible) Machine Head screw to attach through the shaft and thread into the heat set insert.
- The shaft should press-fit into the stock for a more sturdier mount than the Chiappa stock that comes with it.
- The stock has 6x Press-fit 22LR ammo holder slots. You may need to gently sand them a little bit to make them easier to get out – IT DEPENDS on your printing material.